Tile Fix
HW201 - 4 & 206
LASTING PERFECTION
STRONG BOND
LONGER WORKABLE TIME
EASY APPLICATION
Variants: Standard T1: For ceramic tiles. Medium T2: For Small format vitrified tiles. High T3: Large format vitrified tiles, tile-on-tile. Max T4: Granite, marble, natural stone, and cladding. Max-White T4: Swimming pool tiles, glass tiles, etc
20 KG
40 KG
LASTING PERFECTION
Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework. HW Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix Variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement.
STRONG BOND
Unlike cement-sand mixes, HW Tile Fix forms a stronger bond with the substrate such as concrete, screed, plaster or even old tiles. The result: a locked-in hold; indoors or out.
LONGER WORKABLE TIME
20 minutes of open time means no rush. Whether it’s a tricky edge or a full slab grid, there’s space to adjust and align without compromising strength.
EASY APPLICATION
Just add water, mix and spread. The smooth paste applies easily with a notched trowel. Thus saving time and keeping things clean from start to finish.
RESILIENT
Just add water, mix and spread. The smooth paste applies easily with a notched trowel. Thus saving time and keeping things clean from start to finish.
APPLICATION STEPS
Prepare and pre-wet wall / floor
Add Tile Fix to Water
25 to 30% water by weight.
Mix to a thick paste using a blender
Use a slow speed blender for lump-free consistency
Apply with a notch trowel
Application thickness: T1: 3 mm – 6 mm, T2: 3 mm – 6 mm, T3: 6 mm – 12 mm, Max T4: 6 mm – 12 mm, Max-White T4: 6 mm – 12 mm
Apply on the back of the tile
Full coverage for hold.
Fix tile
Press and position within 20 minutes (Open time), adjust using rubber mallet
60 - 80 SQFT
COVERAGE PER
20 kg BAG
30 MINS
HIGH ADJUSTABLE
TIME
ALL VARIANTS
